Table of Contents
Do you have to use epoxy on tumblers?
If you’re making tumblers, you need to be sure that the epoxy resin you’re using is food safe after it’s cured and becomes an inert plastic. There’s a lot of different epoxies out there and not all are food safe.
What can you use instead of epoxy for tumblers?
Most are using our Brite Tone(BT) as an alternative to Epoxy. BT is a Waterbased product and is very high in solids so it builds quicker than any other Waterbased products. It is very different than epoxy as you have to use several thin layers versus 1 or 2 layers of epoxy.
Can you seal glitter without epoxy?
Use hairspray. Hairspray is a fantastic option for sealing glitter on fabric! Not only is it an item you most likely already have around the house, but it is so easy to spray your item and go.
Can I use Mod Podge instead of epoxy?
Paper Mod Podge does all that wonders for you. It works as a sealant to your projects, you can gluwork your project with some classic mod podge and then use the Super Gloss over the top. So it gives you a very shiny, clear finish that looks like epoxy.
How many coats of epoxy does a tumbler need?
It does depend on what you’re creating, but the average is 2-3 coats. To properly seal all the layers beneath, we recommend using a topcoat of your resin. For a sparkling finish, you can mix in glitter from our friends at Alumilite to realize your epoxy glitter tumbler vision.
What can be used instead of epoxy?
Hard plaster and concrete are excellent epoxy resin alternatives, and their use is not limited to small surfaces only. Unlike epoxy resin, concrete and plaster can be easily applied to large surfaces as well. Other great alternatives to epoxy resin include slush latex, metal, plastic, and alabaster.
How do you make epoxy Cups without a turner?
Can you spray clear coat over glitter?
Any brand of clear gloss spray paint will work. Rustoleum, Krylon, etc. Do 4-6 coats to maximize coverage to stop the shedding.
Is Crystalac better than epoxy?
Brite Tone is a Waterbased product and is very high in solids so it builds quicker than any other Waterbased product. It is very different than epoxy as you have to use several thin layers versus 3 or 4 layers of epoxy. The layers dry quickly and can be re-coated in 3 to 4 hours.
What can I put over glitter to stay?
Apply a top layer of Mod Podge to seal in the glitter. You could also use watered down school glue to create an opaque sealant for your crafting project. The top layer of Mod Podge acts as a sealant and will prevent the glitter from flaking away.
Is glossy or matte Mod Podge better?
What is the difference between Mod Podge Gloss, Matte, and Satin? In terms of how they operate and being glues, sealers, and finishes – they are all the same. The ONLY difference is the sheen.
Whats the difference between epoxy and resin?
The most noticeable difference between these two compounds is their intended use. The Epoxy Coating Resin is intended for coating surface applications, while the Casting Resin is used mainly for jewelry, molds or figurines.
Does Mod Podge turn yellow?
Mod Podge does yellow over time especially if your sealed artwork or craft is being hit by sunlight a lot. It can take years, however, for Mod Podge to go yellow. If you want to avoid the yellowing of your Mod Podge, then keep it away from sunlight and heat sources as good as you can.
Do you have to sand between coats of epoxy on tumbler?
????TIP: Remember: whenever your resin is dry, you need to sand before you apply a second coat to ensure the two layers bond together. If you don’t sand, you run the risk of the two layers eventually delaminating.
Can you drink from epoxy Cup?
ArtResin is NOT edible or potable in either liquid or cured form. The maximum temperature cured ArtResin can come in contact with is 120F or 50C. Exposing ArtResin to temperatures higher than this may cause irreparable damage to the resined surface.
How long should you wait between coats of epoxy?
When using epoxy, it can be a helpful process to add a second layer, but you want to make sure to follow the correct procedures. With most coating epoxies, if you are trying to build up to your desired thickness, it is recommended to pour your second coat once the first coat is tacky to the touch (usually 4-6 hours).
Is there a natural alternative to epoxy resin?
EcoPoxy resin is a plant-based alternative to epoxy resin that is great for crafting with. It is certified as a BioPreferred Product by the USDA.
Why is epoxy so expensive?
Epoxy resins are more expensive to produce than other types of resins. This is because the raw materials required for manufacture cost a lot more than other low-end resins and the process of the production is complicated with a low tolerance for errors.
Is liquid glass the same as epoxy resin?
Have you ever wondered how restaurants get those SUPER GLOSSY bar tops and countertops? These table tops and countertops almost look as if the wood was coated in liquid glass. This is exactly what Liquid Glass Epoxy Resin is used for. Often the epoxy resin comes in a two part, base resin and curing agent.
How do you seal a tumbler with epoxy?
Instructions Wash tumbler. Apply tape to top (and bottom – optional). Spray paint the tumbler if needed. Let dry. Apply a layer of mod podge with long even strokes. Dump glitter all over while you are turning the tumbler so the mod podge is all covered. Remove tape. Let dry fully (over night). Time to epoxy.
How do you seal with epoxy?
Sand the project. Remove all dust from the project with tack cloth. Place newspapers or a drop cloth underneath the project. Pour epoxy resin and hardener into a clean coffee can. Apply epoxy using a bristle brush. Check for runs or dry spots as you paint. Allow project to cure for 24 hours in a dust-free room.
How long should epoxy cup Turner?
The epoxy tumbler turner will need to be plugged in and on for 6-8 hours at a time.
