Table of Contents
How do you get rid of Quick Shine build up?
A: Anytime you accidentally get any drops of our Floor Finish or Hardwood Floor Luster on your table or counter, even after it’s dried, you can use Windex or Formula 409 to remove it. Spray it on the area, let it sit for a minute or so then wipe it up with a damp cloth or sponge.
How long does quick shine last?
It is recommended to refrain from cleaning with our Floor Cleaner until the finish is fully cured (4-5 days). Periodic cleaning using our Quick Shine® Multi-Surface Floor Cleaner or Quick Shine® Hardwood Floor Cleaner via our Multi-Surface Spray Mop and microfiber pad is the recommended process.
Does Quick Shine Leave a build up?
If you still have a few areas that have this build up on them, you’ll need to do it again. Doubt its that easy.. anything that shines floors that well will cause a build up..
Is quick shine bad for hardwood floors?
The answer is YES! You can use our Quick Shine® Multi-Surface Floor Finish and Cleaner on a variety of sealed hard surface flooring, including; hardwood, laminate, tile, vinyl, linoleum, stone and more! Protect, Shine, and Maintain is the secret to a lifetime of beautiful floors!Jul 12, 2017.
How often can you use Quick Shine?
Every 2-4 months reapply a fresh new coat of Quick Shine® Multi-Surface or Hardwood Finish to enhance the glow.
Can you use quick shine on countertops?
If you don’t want to mix your own cleaning solution, you can use floor cleaners like Bruce Hardwood and Laminate floor cleaner or Quick Shine Multi-Surface Floor Cleaner from Holloway House. Because countertops and floors are such dominate features in a home, it makes sense to keep them looking good.
What is Quick Shine used for?
Quick Shine Deep Cleaner was specifically developed to remove Quick Shine Floor Finish and imperfections such as trapped pet hair, dust, scuffing and ground-in dirt without harming hardwood floors or their polyurethane seal or any other type of floor surface.
Can I mix quick shine with water?
The first quick shine that is supposed to shine your floor would look like fog on your floors, which you won’t be able to fix unless you would buy this product, which might fix the fog but will defiantly destroy your floors. You’d need to mix it with 3 gallons of water and scrub, which will again destroy your floors.
How do you use Quick Shine?
Directions: Pour Quick Shine® Floor Finish on a clean, dry floor. Spread evenly with a freshly rinsed sponge mop or microfiber mop. Dries to a gloss in 30 minutes. After floor is completely dry, additional coats can be applied if a higher gloss is desired.
Can you use quick shine on tile floors?
Quick Shine Multi-Surface floor finish can be used on all hard surface floors – hardwood, laminate, tile, vinyl and stone. Its ease of application – simply squirt product onto your clean dry floor surface and spread with a freshly rinsed mop- makes floor care a breeze.
Is quick shine safe for pets?
Quick Shine is safe to use in homes with kids and pets and is clean air and safer chemistry certified in partnership with the DFE/EPA and we proudly display their seal on all Quick Shine labeling. A family-owned company, proudly made in the USA.
Why do my hardwood floors look hazy?
Hazy floors can occur when too much cleaner is used. While water can be used as part of the cleaning process, too much water on a hardwood floor can damage floors and alter its look. Avoid using a string or sponge mop to clean since they don’t do a good job of absorbing water once they’re fully soaked.
What is the best wood floor polish?
OUR TOP PICK: Weiman Wood Floor Polish and Restorer. EDITORS CHOICE: Bona Hardwood Floor Polish (High Gloss) BEST VALUE: Howard Feed-N-Wax Wood Polish and Conditioner. RUNNER UP: Quick Shine High Traffic Hardwood Floor Luster and Polish. RUNNER UP: Rejuvenate Professional Wood Floor Restorer and Polish.
What is Quick Shine made of?
Is Quick Shine® Multi-Surface Floor Finish a wax? Quick Shine® Multi-Surface Floor Finish is actually a water-borne polymer formula, not a wax. It protects floors and gives a rich, deep glow to sealed hardwood floors, wood laminate, stone, tile, vinyl, and all other sealed hard surface flooring.
Is quick shine a polyurethane?
The practical consumer has every reason to be skeptical about Quick Shine. Compared to the ordeal of spreading toxic polyurethane, Quick Shine is extraordinarily easy to work with. Simply squeeze the liquid onto the floor as you would a floor cleaner, and spread it with a clean sponge mop or a dry Swiffer-type cloth.
Does Bona floor polish contain wax?
It is a protective layer, often made of urethane or wax and is usually intended to provide shine as well as protection to the permanent finish and stain. It is intended to be used on a clean, finished floor.
How do I get my worktops to shine again?
Glossy Clean the surface with soapy water and an ammonia-based cleaner (i.e. Softscrub, and avoid cleaners that leave behind residues.) For extra shine, clean with an abrasive household cleanser like Ajax or Comet and apply gently with a sponge. Do this once a month to maintain the original level of gloss.
Is quick shine a wax?
Quick Shine is not a wax; it’s a polymer finish which means you never have to strip it off the floor. When the floor is not as shiny as you would like, just apply another coat. Holloway House makes a kit that has a microfiber mop and a small bottle of Quick Shine, and that will be all you need.
How do I remove Mop and Glo build up?
Regardless of the cause, the label recommends removing old coats with a solution of one-fourth cup Lysol All-Purpose Cleaner (without bleach) and one cup of household ammonia mixed into a half-gallon of warm water.
