Table of Contents
5 Answers. The toilet flange needs to be on top of the finished floor. Meaning the bottom edge of the flange needs to be on the same plane as the toilet. So if your toilet sits on the tile, the flange needs to be on top of the tile too.
Can you put a toilet on top of tile?
To install tile properly around the toilet, you need to affix it to the floor under the fixture. Because toilets sit on top of tile, any rough cuts are hidden, making it easy to achieve the appearance of tile that has been custom-cut for your bathroom.
Should I tile around or under toilet?
The bathroom fitters are unanimous—if you’re looking for a high quality finish, with a better seal against water damage, then always tile the floor first.
Should toilet flange go over tile?
The optimum flange height to aim for is 1/4 inch above the finished floor. This typically allows for almost any type of wax ring to be used and still ensure a good seal. If you recently tiled or changed the bathroom flooring, the flange height is likely less than optimal.
Should the toilet flange be flush with the floor?
Replacing or adjusting the height of your flange. When you install your toilet flange, it should be installed on top of the finished floor, and it should also be installed perfectly level. If your flange sits even or below the floor, then it’s wrong. It has to sit evenly on top of the finished floor.
Does toilet or floor install first?
Bathroom Construction Floor coverings such as vinyl then are placed on top of the subfloor. The toilet goes in next, and the vanity typically is installed last without a top, sink or faucets. If you’re doing a complete floor replacement, the vanity needs to be removed completely.
In what order should I remodel my bathroom?
How to renovate a bathroom: order of work > Assessing your requirements. > Setting a budget. > Choosing the perfect design. > Removing your old bathroom. > Installing your new bathroom. > Sanitary ware and fitted furniture. > Wall and floor coverings. > Lighting and ventilation.
What do you do if the toilet flange is above the floor?
To use grout to fix your flange: Start by mixing your grout. Get your toilet in place and set your toilet on four rubber shims. Take your mixed grout and pack it into the gap. Wait 24-hours before the grout to dry. Once dried, remove the shims.
Can you use 2 wax rings when installing a toilet?
You can certainly install a toilet with multiple wax rings, in fact sometimes it is necessary to make sure you don’t have a leak. You can buy an extra-thick wax ring, or you can just buy two rings and stack one on top of the other.
Do you have to replace the wax ring when you remove a toilet?
Whenever you remove a toilet for any reason, you will need to replace the wax ring seal between the toilet and the toilet flange (sometimes called a closet flange) attached to the floor. A wax seal is used because it resists mold and bacteria and retains its sealing ability after years of use.
Can toilet flange be lower than floor?
In a typical toilet installation, the floor flange that sits inside the drain opening below the toilet should be positioned so that its bottom surface rests flush against the finished floor or no more than 1/4 inch above or below the floor.
How thick is an extra thick wax ring?
If it’s at the same level, or no more than 1/4 inch below it, a regular wax ring, which is between 3/4 and 1 inch thick, is all you need. If the flange is recessed deeper than that, you need an extra-thick wax ring, which is about an inch thicker than a regular one.
How do you install a toilet when the flange is too low?
Installation process is simple: install the gasket on top of the toilet flange on the floor, add spacer rings to match the new floor surface level, add the extender, add a standard wax ring the set the toilet on top. I like the product but I see some potential issues: Set-Rite spacer rings are hollow.
Should flooring go under toilet?
It’s considered best practice to always put a toilet on top of the flooring, whether the floor is made of wood, vinyl, tiles, etc. Not only will placing the toilet on top of the vinyl plank flooring generally look better, but it also ensures that the weight of the toilet is held by the floor and not the pipes.
Do you have to remove toilet to install vinyl flooring?
They aren’t as easy to cut into rounded shapes as vinyl tile is, so they often require that you remove the toilet. It’s better to leave the toilet where it is and work around it if you can.
How long after installation can a toilet be used?
Once the toilet is installed, you should wait at least 6 to 12 hours to ensure that all the work won’t go to waste. No caulk or grout used – In this case, you don’t have to wait as there is nothing that needs to dry.
What is the average cost to remodel a bathroom?
Average Cost of a Bathroom Remodel The average bathroom remodel costs $10,920 Most homeowners spend between $6,588 and $16,360. You can spend as little as $3,500 to $7,000 updating the essentials in a small or medium-sized bathroom. On a large or master bath, you could spend $25,000 or more.
Can you renovate a bathroom for 5000?
On average, you can start remodeling a bathroom with only $2,500 and go up to $23,000. If your budget is $5,000, you can easily carry out the remodel. While it is a maximum budget to spend, you might not even have to pay $5,000 for the remodeling.
What is the cheapest way to renovate a bathroom?
15 Cheap Bathroom Remodel Ideas 01 of 15. Use Lower-Cost Lookalike Materials. 02 of 15. Paint Your Wooden Floor. 03 of 15. Refinish Your Tub Instead of Replacing It. 04 of 15. Touch Up Your Tub Rather Than Refinishing It. 05 of 15. Refresh Cabinets With New Hardware. 06 of 15. Install a New Sink Faucet. 07 of 15. 08 of 15.
Where do you start tiling a bathroom floor?
You typically want to start your bathroom tile installation in the back corner. But if you just start tiling from the back corner, your most visible areas will not line up as planned. Instead, carefully layout the floor tiles with the tile spacers in between them.
