Table of Contents
You can fit 8 seats at a 5 foot round table (60 inches round).
How many can you seat at a 5 foot rectangular table?
If rectangular, and the table length is 5 feet: sits 4-6 comfortably; if it’s 5 feet round, up to 8 people comfortably; If rectangular, and the table length is 6 feet: sits 6-8 comfortably; if it’s 6 feet round: up to 10 people comfortably (if you use banquet chairs, you can squeeze 12 people);.
How big is a table that seats 6?
Choosing the Right Dining Table Size Size (Diameter): Oval & Rectangular Will Comfortably Seat: Round & Square Will Comfortably Seat: 4 feet (48 inches) 4 people 4 people 5 feet (60 inches) 6 people 6 people 6 feet (72 inches) 6 people 6 people 8 feet (96 inches) 8 people Not a typical size.
How big of a table do you need to seat 8?
Dining table sizes for eight can range from 72 to 96 inches long by 36 to 43 inches wide (6–8ft x 3ft–3’6″; 183–244cm x 91–110cm), with the lower measurements also a comfortable fit for six seats and the higher measurements suitable to squeeze 10 people.
Can 9 people fit at a 5 ft Round table?
Round Table Sizes. For your 5-foot-rounds, you can seat 7-10 people at each. For the 5.5-foot-rounds, you can seat 8-11. With the 6-foots, you can seat 9-12.
How many can you seat at a 4 foot rectangular table?
A 4 ft. banquet table can comfortably seat 4 guests, and a 6 ft. banquet table can comfortably sit 6.
How many people does a 72 table have?
Stretching the length to 72″ will allow you to comfortably seat 8 people, and increasing the size to 72″ x 48″ will allow you to comfortably seat 10.
How big is a rectangle table that seats 6?
For Rectangular Tables: Most people find that a 6 foot long (72 inch) dining table is perfect for seating 6 comfortably.
How long is a table that seats 10?
Tables are typically 36 inches wide, says Home Stratosphere. If the chosen table is less than this, the end may not be wide enough for a setting, in which case the required length must adjusted. To seat 10 people, with four on each side of the rectangle, the table must be 96 inches long.
How long is a 6 seater dining table?
Dining Table Size Guide Size of Dining Table Length Width 4 seater dining table 75cm – 90cm 75cm – 90cm 6 seater dining table 118cm – 140cm 75cm – 90cm 8 seater dining table 150cm – 220cm 75cm – 90cm 10 seater dining table 180cm – 280cm 90cm – 100cm.
Can you fit 6 chairs around a 48 table?
A 48″ round table can seat 4-6 people comfortably.
How big of a table can I fit in a 10×10 room?
There is adequate space for seating and a walkway behind the diners with a clearance of 36 to 42 inches from table edge to a wall or other furniture. A table 36 to 42 inches wide and 60 to 72 inches long can be accommodated in a dining room.
How many inches is a 5 ft Round table?
60 inch or 5 ft round tables – 120 inch round table cloths for a full drape, 108 inch round for some leg room, 90 inch round for a drop that goes halfway to the floor.
How many inches is a 5 foot round table?
60 Inch Table Size Number of People Average Price 8 Foot Rectangle Table (96″x30″) 8-10 $8.00 36 Inch (3 foot) Round Table 4 $8.00 48 Inch (4 foot) Round Table 6-8 $8.00 60 Inch (5 foot) Round Table 8-10 $8.00.
How big is a 10 person round table?
Circular 10-Person Tables Circular tables are measured by diameter. Therefore, a circular table that comfortably sits ten people would be about 84-inches in size.
How long is a table that seats 12?
You need about 1 1/2 to 2 feet to seat a diner comfortably, so a table about 9-10 feet long would work for 12. Pedestal tables can accommodate guests better since there’s no leg to get in the way.
How long is a dining table that seats 8?
Rectangular and Oval Dining People 2 No Shared area 2′ x 2’6″ (61 x 76cm) Minimum Size (with shared area) 2′ x 3′ (61 x 91cm) 6 6′ x 2’6″ (183 x 76cm) 6’6″ x 3′ (198 x 91cm) 8 8′ x 2’6″ (244 x 76cm) 8’6″ x 3′ (259 x 91cm) 10 10′ x 2’6″ (305 x 76cm) 10’6″ x 3′ (320 x 91cm) 12 12′ x 2’6″ (366 x 76cm) 10’6″ x 4′ (320 x 122cm).
How many chairs fit around a 10ft table?
4. How many chairs should I fit around a table? Plan for at least 2 feet of table surface for each chair. For example, a 10-foot-long table can have five chairs across and two at each end to seat 12 people.
How many does a 90 inch table seat?
Tables that measure 90 inches and above are best for comfortably seating 8 or more people. Many of our large dining tables even come with extension leaves, which will expand the designs to greater lengths and fit more guests.
How long is a table that seats 20?
So if you’re looking for a large rectangular table to seat 20, you can start by putting 2 folks on the ends of the table, then count 2 people each 2′ to seat the remaining 18 — or a total table length of 18′ (216″).
How many long tables do you need for 50 guests?
The math is pretty simple here if you want to just go with the blind rule of 1 table per 10 guests. That’s 5 cocktail tables for 50 guests and 6 tables for 60 guests.
