Table of Contents
How do I change the filament on my 3D printer?
Removal of current filament Step 1: Preheat your hot end based on the temperature guidelines of your current filament. Step 2: Wait until the hot end heats up to the required temperature. Step 3: Manually extrude a small portion of the filament. Step 4: Push down the coupling to release the filament from the hot end.
How do you change a filament in a print?
Carefully remove the filament from the extruder and load the new filament. Slowly push the filament through the PTFE tube and hot end. Once you feel resistance when pushing the filament, look at the nozzle. Continue to gently push the filament until you see the new filament coming out of the nozzle.
What is the best way to change filament ender 3?
Scroll to Control Settings > Temperature > Nozzle. Use the LCD knob to dial the temperature up. Wait for the hot end to reach the desired temperature. Squeeze the extruder lever to release the grip on the filament, withdraw the filament, and remove the spool.
How do you change a filament Cura mid print?
Step 1: Once Sliced, Use Preview Mode to Find the Correct Layer. Step 2: This Is the Layer to Start Using the New Filament On. Step 3: Navigate the Cura Menus for Extensions -> Post Processing -> Edit G-Code. Step 4: Choose “Filament Change”.
Do I remove filament after printing?
Do You Have to Remove Filament After Printing? Most people experience no serious problems after leaving the filament in the extruder. However, there can be a few exceptions too. Whether to remove filament immediately or let it stay overnight, basically depends on the filament type.
How do you unload a filament?
Manually Unloading Material: First heat up the hotend to the printing temperature of the material currently loaded. Release the tension on the extruder if possible. With tension relieved, push the filament gently into the extruder until you see a small amount extrude out the nozzle.
Why is filament stuck?
Filament jams happen when the extruder can’t push filament through the hot end. The extruder either grinds the filament until it’s so thin that the gear that advances the filament is no longer in contact with it, or the motor that drives the extruder stalls because it’s overloaded.
How do you stop filament grinding?
The slower rotation of the extruder motor can help avoid grinding issues. You can adjust this setting by clicking “Edit Process Settings” and selecting the Speeds tab. Adjust the “Default Printing Speed,” which controls the speed of any movements where the extruder is actively extruding plastic.
How do you fix filament jam?
Try and keep the filament as straight as possible. Natural or clear coloured filament works best so you can see the residue when you pull it out. If your hot end is too clogged to get anything out of the hot end, take a thin wire and a pair of plyers and stick it into the tip of the nozzle to clear the blockage.
What temperature does PETG print at?
PETG has a moderate printing temperature, typically printing between 230°C – 250°C.
What temp should PLA be printed at?
What temperature to print PLA? In general, PLA filament settings have an optimal printing PLA temperature range from about 185C to about 205C. If you’re using 1.75mm as opposed to thicker 2.85mm (or 3.00mm) your optimal print will be closer to the lower end of this PLA filament temperature range.
How do I change my Cura filament?
Switch to the layer view and determine the layer which you want to pause at. From Cura’s main menu, choose Extensions->Post Processing->Modify G-Ccode. Click the “Add a script” button. Choose “Change filament at height” Enter the desired layer in the “Pause at layer” box. Choose the Pause/Change method.
How do you change the filament on a cura?
Step 1: Find the Layer for the Change in the Preview. Step 2: Extensions > Post Processing > Modify G-Code. Step 3: Add the Filament Change Script. Step 4: Adjust the Script Settings. Step 5: Slice the Object Again. Step 6: Start Printing. Step 7: Change Filament and Continue Printing. Troubleshooting – Cura Filament Change.
Is it OK to pause a 3D print?
You can pause your 3D printer as long as you want, so long as the print doesn’t move from the bed or be knocked off. Sometimes the printer can be a bit slow to reprint after setting or changes made, so just keep checking in on it.
Can I pause a 3d print overnight?
Yes, you can pause an Ender 3 printer overnight by using the “Pause Print” feature within the control box. Make sure not to click “Stop Print” instead because this will end the print altogether. You’ll be able to easily resume the print in the morning.
What does Octoprint pause do?
Clicking on Pause in Octoprint stops the 3d print. The printing head remains on the last position. In standard settings, you don’t have a chance to resume the print successfully. The print head doesn’t return to the last position automatically.
How do I add a pause in Cura?
Ultimaker Cura contains “Extensions”; in version 4.1.0, the process is as follows: Extensions -> Post Processing -> Modify G-code. Add a Script -> Pause at height. Choose the Pause height to match the height the insertion should take place. Choose a park position well outside of the print.
Do you need to keep filament dry?
If you’re using PLA filament, silica gel packs must become your best friend. Simply place the gel packs into sealable Ziploc bags, Tupperware, or anything else that won’t let air get inside. In the end, though, keeping your filament dry using silica gel is a neat and easy method for keeping your filament dry.
